Ornamental Monkey Face Machine Embroidery Design for Hoodies

By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.

Ornamental Monkey Face Machine Embroidery Design features a stylized primate face surrounded by symmetrical floral scrollwork. The single-color composition can be stitched in gold, white, black, bronze or another contrasting shade on children’s hoodies, sweatshirts, cushion fronts, tote bags and textile wall panels.

The design is large and detailed. For a child’s hoodie, print the full-size template before stitching and check that the complete monkey fits between the armholes, below the hood seam and above any pocket or waistband.

This product contains a file for a computerized embroidery machine. It is not a finished hoodie, sweatshirt, patch, cushion or other physical item.

Product Details

Color sequence: one color without thread changes

Size: 198.6x179.8 mm (7.82x7.08 "), Stitches: 29316

Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp, .sew, .dat, .vp3, art

What Does the Design Look Like?

The monkey’s eyes, muzzle, ears and facial outline are surrounded by dense ornamental leaves, curls and Baroque-style flourishes. The open facial area allows the hoodie fabric to remain visible, while the decorative outer sections create a bold frame.

• large symmetrical monkey face;
• ornamental floral and scroll details;
• one color without thread changes;
• works with regular polyester, rayon or tested metallic thread;
• suitable for statement garment backs and large flat panels.

Which Fabric Is Best for a Child’s Hoodie?

Choose a stable, medium- or heavyweight hoodie fabric with a smooth outer face and limited stretch.

Where Should the Monkey Be Placed on a Child’s Hoodie?

Because the file measures almost 200 mm across, the center back is normally the most practical placement. Use the front only when the hoodie is large enough and the design remains clear of the neckline, zipper and kangaroo pocket.

1. Print the design at full size.
2. Lay the hoodie flat without stretching it.
3. Mark the center line of the back panel.
4. Keep the ornament below the hood attachment seam.
5. Check that both ears remain inside the flat back area.
6. Keep the lower muzzle above the waistband seam.
7. Confirm that no part enters an armhole or side seam.

When sewing the hoodie from scratch, embroider the flat back panel before attaching the sleeves, hood and waistband. This gives better hoop access and prevents the remaining garment from pulling the embroidery carriage.

For a ready-made hoodie, secure the sleeves, hood and front section outside the embroidery field. Run the machine’s boundary trace before starting.

Which Hoop Is Required?

The exact file is:

Size: 198.6x179.8 mm (7.82x7.08 "), Stitches: 29316

It may fit a true 200x200 mm field when the machine supports the complete 198.6 mm width. It may also fit a 180x300 mm field after rotation, as the rotated dimensions are 179.8x198.6 mm.

A field limited to exactly 180 mm has only 0.2 mm of theoretical clearance after rotation. Check the machine manual and software limits before purchasing or loading the file.

How Do You Stabilize a Hoodie?

Use a soft permanent cutaway or no-show mesh under the hoodie fabric. Knit material needs support that remains after washing and wearing.

• hoop the fabric and cutaway together without stretching the knit;
• cover the complete hoop opening with backing;
• use a basting frame when the hoodie can move relative to the backing;
• add water-soluble topping only when the outer surface has pile or pronounced texture;
• support the weight of the hoodie beside the machine.

A compact weight check can be made with these formulas:

Fabric g/m² = sample weight in grams × 10,000 ÷ (length in cm × width in cm)

Starting backing g/m² = fabric g/m² ÷ 3

Fabric oz/yd² = sample weight in ounces × 1,296 ÷ (length in inches × width in inches)

Starting backing oz/yd² = fabric oz/yd² ÷ 3

This is a Royal Present practical starting rule. The backing type and final number of layers must still be confirmed with a complete test stitch. Water-soluble topping above the fabric is separate and is not included in the backing-weight calculation.

How Do You Make the Reverse Soft for a Child?

After the embroidery is complete, cover the reverse with a soft fusible embroidery cover-up. This material is also sold as a fusible soft inlay or iron-on embroidery backing cover.

Common products include:

• Sulky Tender Touch;
• Madeira E-ZEE Comfort Wear;
• Gunold Cover The Back.

These products are placed over the finished embroidery on the inside of the garment. They cover rough bobbin stitches and trimmed stabilizer edges that might rub against the child’s skin.

How to Apply the Soft Inside Cover

1. Finish the complete embroidery and remove the hoodie from the hoop.
2. Carefully trim excess cutaway without cutting the fabric or stitches.
3. Turn the hoodie inside out.
4. Cut the soft fusible cover approximately 1–2 cm larger than the embroidered area.
5. Round every corner so sharp points are less likely to lift during washing.
6. Place the adhesive or heat-activated side against the reverse of the embroidery.
7. Protect the garment and embroidery with a clean pressing cloth.
8. Fuse according to the exact temperature and time stated by the cover manufacturer.
9. Allow the area to cool flat before stretching or wearing the hoodie.

Always test the heat setting on a fabric offcut. Polyester fleece, printed fabric and coated sports fabric can be damaged by excessive heat.

What About Sensitive Skin or Allergies?

A soft fusible cover reduces scratching and direct contact with the reverse stitches, but it is not a guaranteed allergy barrier.

• check the fiber and adhesive composition of the chosen cover;
• do not describe the material as hypoallergenic unless the manufacturer provides that certification;
• prewash the hoodie fabric when appropriate;
• use soft bobbin thread and carefully trimmed cutaway;
• test the fused cover on an offcut before applying it to the garment;
• do not use the hoodie if redness or irritation appears.

For a child with a known reaction to polyester, polyamide, adhesives or textile finishes, select materials according to professional medical advice rather than relying only on an embroidery cover.

Which Needle and Thread Should Be Used?

Begin with a fresh 75/11 embroidery or light ballpoint needle on medium-weight French terry. Test an 80/12 needle on dense sweatshirt fleece or a layered garment panel.

Regular polyester embroidery thread is practical for a washable child’s hoodie. It usually creates a softer and more flexible result than stitching the entire large design with metallic thread.

Gold metallic thread can be tested for a decorative version, but reduce the machine speed and check the finished stiffness before using it on children’s clothing.

How Do You Prevent Puckering and Outline Movement?

• do not stretch the hoodie in the hoop;
• use permanent cutaway support on knit fabric;
• secure the complete embroidery area;
• support the weight of the hoodie during stitching;
• keep pockets, sleeves and the hood away from the carriage;
• use a fresh needle;
• reduce speed through dense ornamental sections;
• test the complete file on matching sweatshirt fabric.

Related Monkey Designs

• For a similar ornamental monkey available in several sizes, see Ornamental Machine Embroidery Designs Monkey.
• For a colorful character alternative, see Young Orangutan Monkey Hipster.
• Browse the full Primates Machine Embroidery Designs collection.
• Explore more Animal Machine Embroidery Designs.

Do Not Resize the File Independently

Do not enlarge or reduce the supplied file independently. Without professional stitch recalculation, resizing can damage density, underlay, pull compensation, the shape of the eyes and muzzle, ornamental curls and alignment between sections.

Royal Present is not responsible for embroidery quality after customer resizing, editing or file conversion.

About the Designer

This design was created by Ludmila Konovalova, machine embroidery designer.

FAQ

Is this design suitable for a child’s hoodie?

Yes, on stable medium- or heavyweight sweatshirt fabric. Because the file is large, first check the complete printed template against the child’s hoodie.

Where should it be placed?

The center back is usually the most practical position. Keep the complete design below the hood seam, between the armholes and above the waistband.

Which fabric is recommended?

Cotton-rich French terry, stable sweatshirt fleece or a dense cotton-polyester sweatshirt knit with a smooth outer face.

Which stabilizer should be used?

Use a soft permanent cutaway or no-show mesh. Tear-away alone is not the preferred support for a large design on stretch hoodie fabric.

What is the soft material placed over the reverse called?

It is called a soft fusible embroidery cover-up or fusible soft inlay. Common products include Sulky Tender Touch, Madeira E-ZEE Comfort Wear and Gunold Cover The Back.

Does the inside cover prevent allergies?

No guarantee can be made. It reduces rubbing and direct contact with rough stitches, but the fiber and adhesive composition must be checked for anyone with a known contact allergy.

Which hoop is required?

The file measures 198.6x179.8 mm (7.82x7.08 "). It may fit a true 200x200 mm field or a 180x300 mm field after rotation when the complete dimensions are supported.

Is water-soluble topping necessary?

Use topping only on brushed, looped or raised surfaces. It is placed above the hoodie fabric and does not replace the permanent cutaway underneath.

Can metallic gold thread be used?

Yes, after testing. For children’s clothing, regular polyester thread normally creates a softer and more washable result.

Can I resize the design myself?

No. Independent resizing may damage the ornamental details, stitch density and registration. Use the professional Resize of Design service when another size is required.